(19% VAT included, shipping costs not included)
|Engine displacement (l):|
|Year of manufacture:||01 - 08|
|purchase of ecus|
Faults and symptoms: Sporadic or total failure. Possible errors of the indicators: - ABS lights burn intermittently or permanently, or flash - yellow ABS symbol, sporadically or permanently - handbrake warning light burns sporadically or permanently - Symbol for brake pads burns sporadically or permanently - STOP brake fault appears in the on-board computer, sporadically or permanently - the red exclamation flashes or burns intermittently or permanently - Wear indicator, sporadically or permanently - ABS fault, sporadically or permanently failing components: - ABS, first sporadically, then permanently - total failure, sporadically or permanently - no ABS control unit function intermittently or permanently - in self-diagnosis is no longer available, sporadically or permanently any error codes / readout - control unit defective - 18014 CAN bus / data cable between readout device and ABS control unit: Rough road signal for engine torque control faulty. Possible effects: motor torque control without function, error lamp lights may light up - no feedback from the control unit (After a light shock to the case the error is temporarily gone.) - no communication with the control unit, fault memory can not be read, occasionally or permanently - undervoltage, later no readout possible Other: - beep, sporadically or permanently - startup beep - beep three times after the ignition - intermittently, warning lights go off again - initially at low temperatures ABS is in function, later even in cold weather is disabled.
There are statutory warranty rights for all goods and services offered on our website.
Delivery time of goods: 1 - 4 days.
Delivery time for the provision of services: 2 - 5 days.
Standard delivery takes place as insured package with DPD. Express delivery available on request.
Payment and accepted methods of payment: The purchase price for new equipment or replacement equipment is to be paid after the contract immediately, the price of inspection or repair after service. Payments are, unless otherwise agreed and stated on the invoice due date of the invoice immediately net without deduction. Payments can be made in advance (bank transfer or Paypal), by cash or COD.
Please send us your ABS control unit without the hydraulic block.
The weight of the hydraulic block often causes transport damages, for which we are not liable. If you send us the hydraulic block, we will bill an additional charge of minimum 20 € for increased amount of work.
Hydraulic blocks have to be sealed for transport to avoid contamination. Hydraulic blocks which have not been sealed adequately should not be reinstalled into the vehicle.
The number on the device may be written like:
0 273 004 283, 0-273-004-283, 0273-004-283
last update: 16.9.2019